Thrane Explorer 100/110
Half the size of a laptop and weighing less than 1kg, the Thrane & Thrane Explorer 110 meets the toughest demands for portability. Built for persistent travel and bumpy rides, the terminal is incredibly durable and works just as well in a dusty desert as in a humid rain forest.
The Explorer 110 offers high speed data and voice simultaneously through one terminal. Over a standard IP connection, it connects at up to 384kbps in the receive direction, and up to 240kbps when sending. Streaming data is available at 32kbps and 64kbps for both send and receive. The terminal connects to a laptop computer via a USB port or over a Bluetooth wireless connection.
Detailed Specification (PDF 384kb)
Firmware Download (PDF 12.6mb)
The unique feature of the Explorer 110 is its seperate antenna, attached by cable, which allows the user to position the antenna on a window sill while working indoors. Voice is via a custom Nera handset or via a Bluetooth handset.
Thrane & Thrane Explorer 110
Please take note that the Explorer 100/110 BGAN is now available. The only difference between the two models is the 110 has an Ethernet Interface as opposed to the USB on the 100.
Explorer 100/110 Specifications
Size/Weight |
20x15x4.5cm
995g including battery |
Operating Temperature |
-20c - +55c 95%non-condensing humidity at 40c |
Power Requirements |
Input voltage: 100-240 VAC +/- 10% 50-60Hz 800mA
Output voltage: 12VDC +/-10% |
Interfaces |
USB up to 12 Mbps
Built-in Bluetooth antenna, 432.6 kbps
ISDN Rj-45 connector for 1.5 watt voice handset |
Antenna |
Gain: Tx 8.5 dBic Rx 8.5 dBic
Beam width: +/-30 degrees
Frequency range: L-band Tx, Rx |
Battery Capacity |
Type: 7.2 Volt 2400 mAh Li-Ion rechargeable
Standby: 36 hours |
What's in the box? |
Antenna Unit
Interface Unit
AC/DC Adapter
USB Cable
CD/Quickstart |
|